StarCOM diagnostic procedures

This section is only for selected beta testers. StarCOM is not available for sale at this moment.

General information

  1. Mercedes-Benz Security gateway/diagnostic firewall
  2. Mercedes/Mitsubishi electric/hybrid vehicles diagnostics

Powertrain

  • Engine
  1. CDI Injector coding
  2. Clear adaptation memory
  3. DPF regeneration
  4. DPF reset
  5. EGR valve reset
  6. Enabling of engine start after crash event
  7. Evacuate the gas system
  8. Zero quantity calibration
  9. Engine tests
    1. Engine OBD2 emission tests readiness
    2. Engine injected amount correction test
    3. Engine idle speed test
    4. Engine compression test
  • Gearbox / transmission
  1. Dynamometer mode
  2. Gearbox basic adjustment
  3. Selection range sensor learning
  4. Torque converter adaption
  • Gear selector - intelligent selector module (ISM)
  1. Gear positions programming
  2. Suspension fluid reservoir charging
  • Other
  1. High voltage component lock

Chassis

  • Braking system / stabilization (ABS/ESP)
  1. ABS control unit calibration
  2. Brake bleed ABS/ESP
  3. ESP driving test activation
  4. Reactivate tire pressure loss warning
  5. Steering wheel angle sensor calibration
  6. Yaw rate sensor (lateral and longitudinal) calibration
  • Electronic parking brake (EPB)
  1. Apply parking brake
  2. EPB calibration
  3. Parking brake assembly position
  4. Release parking brake
  • Convertible top
  1. Panoramic sliding sunroof calibration
  2. Rain sensor reset
  • Tire pressure monitoring system (TPMS)
  1. Learning the wheel sensor IDs
  2. Programing of wheel sensor ID
  • Headlights
  1. Headlight operation time reset
  2. Tourist mode
  3. Zero point level learning
  • Other
  1. Liftgate control normalization
  2. Power window denormalization
  3. Trailer control module initialization
  4. Transfer case control module calibration

Body

  • Air conditioning (HVAC)
  1. Break-in refrigerant compressor
  2. Check flap adjustment range
  3. Positioning motors adaptation
  4. Positioning motors normalization
  5. Unlock independent (auxiliary) heater
  • Instrument cluster (KI)
  1. Mercedes service interval reset
  2. AdBlue quality factor reset
  • Signal acquisition/actuation module (SAM)
  1. Battery replacement
  2. Rain sensor learning
  3. Windscreen type learning
  4. Windshield parameterization and adaption

Multimedia

  1. Camera system calibration

Other resources

  1. StarCOM user manual
  2. StarCOM video tutorials