Porsche Reset Actuation Counter

Supported coding features by PoCOM diagnostic tool https://www.obdtester.com/pocom

Actuation Counter Reset

What it does

• Resets the actuation counter for components such as convertible top, parking brake, or other mechanical actuators
• Ensures accurate tracking of service intervals and component usage
• Prepares system for new calibration or maintenance procedures

When it is required

• After actuator replacement
• Before or after system calibration
• When actuation counter reaches service limit
• During diagnostic or troubleshooting procedures

Conditions that must be met

• Vehicle stationary
• Ignition ON
• Stable battery voltage
• Diagnostic tool connected
• Component accessible and operable

What happens during reset

• Stored actuation values are erased
• Counter is set to zero
• System is ready for recalibration or normal operation

If reset is not performed

• Maintenance or service intervals may be inaccurate
• System may limit actuator operation based on old values
• Fault codes or warnings may persist

After reset

• Perform any required calibration
• Verify component operation
• Confirm counter reset in live data
• Check for fault codes and clear if necessary

Coverage in PoCOM