Porsche Delete Calibration Data
Supported coding features by PoCOM diagnostic tool https://www.obdtester.com/pocom
- Delete calibration data
- Reset actuation counter
- Reset convertible top counter
What it does
- Deletes stored calibration and adaptation data
- Resets counters related to system actuation
- Prepares the system for new calibration or teaching procedures
Includes
- Delete calibration data
- Reset actuation counter
- Reset convertible top counter
When it is required
- Before performing a new calibration procedure
- After replacing control units or actuators
- When calibration data is corrupted or invalid
- During troubleshooting of convertible top or actuator systems
Conditions that must be met
- Vehicle stationary
- Ignition ON
- Stable battery voltage
- Diagnostic tool connected
What happens during data deletion
- Stored calibration values are erased
- Actuation and usage counters are reset
- System is returned to default state
- Control unit awaits new calibration
If procedure is not performed
- New calibration may fail
- System may behave unpredictably
- Warning lights may remain active
After deletion
- Perform required calibration or teaching procedure
- Verify system operation
- Clear fault codes if present
- Confirm counters are reset correctly