Ford TDCi Injector Coding EEC-V Delphi ICU

General information

The system includes EEC-V DPC control unit and Delphi ICU.

Format: 16 hexadecimal characters (e.g. 9C25BB0DA4ECA643) individual for each cylinder / injector.

Before programming/coding injectors it is necessary to wean the vehicle at least 8 hours.

Fault codes related to the injectors are:
P2336 - Cylinder 1 Above Knock Threshold
P2337 - Cylinder 2 Above Knock Threshold
P2338 - Cylinder 3 Above Knock Threshold
P2339 - Cylinder 4 Above Knock Threshold

Injector reading / coding procedure is available from FCOM in PCM control unit -> Coding.

Covered models

Model Model years Engines
Ford Mondeo -2003 ?
Ford Focus ? ?
Ford C-Max ? ?
Ford Fiesta ? ?
Ford Transit ? ?
Ford Transit Connect ? ?

Sixteen-digit calibration number

Is necessary to enter the ordinal number of injector (1, 2, 3 or 4) which should be programmed, at the beginning of procedure rather than calibration data. Calibration data will be entered in the next step. The ordinal numbers of injectors are:

2.0 TDCi

No. 1 is upper left injector for cylinder No. 1
No. 2 is upper right injector for cylinder No. 3
No. 3 is lower left injector for cylinder No. 4
No. 4 is lower right injector for cylinder No. 2

Other engines

No. 1 is upper left injector for cylinder No. 1
No. 2 is upper right injector for cylinder No. 2
No. 3 is lower left injector for cylinder No. 3
No. 4 is lower right injector for cylinder No. 4