BimCOM Land Rover / Rover / MG diagnostics

BimCOM has (currently) limited capability to diagnose Land Rover, Rover and MG vehicles. Based on support request we can improve diagnostics support for mentioned brands.

Please note that newer Land Rover vehicles are based on Ford platform and they are supported in F-COM diagnostic tool.

Land Rover

Coverage: http://www.obdtester.com/bimcom-eculist/land_rover

Not all engine ECUs are supported at this moment.

Land Rover Defender

Land Rover Discovery

Land Rover Freelander

Land Rover Range Rover P38

  • SRS/Airbag diagnostics is possible only if OBD2 pin 14 (SRS K-Line) is connected to OBD2 pin 7 (BimCOM multiplexed interface is not capable to connect K-Line to pin 14, where CAN-LOW is expected).
  • Air suspension ECU is on OBD2 pins 11 and 12 (diagnossis not possible at this moment).

Land Rover Range Rover L322

To add additional control units to BimCOM, please try scanning vehicle using BMW 5 E39 model and provide all snapshots.

Rover

Coverage: http://www.obdtester.com/bimcom-eculist/rover

Not all engine ECUs are supported at this moment. 5V ROSCO diagnostic protocol is not supported (manufacturer-specific connector).

Rover 200

Rover 600

Rover 800

Rover 25

Rover 45

Rover 75

Rover CDV

MG

Coverage: http://www.obdtester.com/bimcom-eculist/mg

Not all engine ECUs are supported at this moment. 5V ROSCO diagnostic protocol is not supported (manufacturer-specific connector).